Zero Clear Operation; Start Up Operation - General Measure Checkweigher User Manual

1. Click this button to enter the interface of creating products and setting product
parameters.
2. Click this button to enter the parameter setting interface.
3. Click this button to enter the data interface to view the relevant check data.
4. Click this button to clear zero.
5. Click this button for user management operations.
6. Click this button to start and stop the device.
7. Click this type of action box to modify the value of this item.
8. Click the action box to modify the value of this item.
9.
10. Click this type of action box to perform the corresponding operation.
11. Click this type of action box to open and close the corresponding function Settings.

3.3.2 Zero clear operation

If the touch screen displays the real-time weight value of the checkweigher in the
stopped state is not zero (zero indicates the off state), click "Clear zero" to clear the
weighing platform, so that the real-time weight value is displayed as zero, and then the
zero indicates the on state.(It can be operated only in the stopped state).
If the weight check scale shows that the weight is unchanged, the stable identifier bit
is on; otherwise, the stable identifier bit is off (the stable identifier bit is only related to the
weight state, and has nothing to do with the operation of the checkweigher and the size of
the weight value).

3.3.3 Start up operation

Click "Start" on the touch screen to start the weight checking scale, and the weight
checking motor drives the weight checking belt to rotate. At this time, the operation label
on the touch screen is "Running", and the weight checking operation can start.
Click this type of action box to select Settings for this definition.
14
CW-100G (C01+MCGS)