General Measure Checkweigher User Manual page 43

Maximum time on the
scale table
Material blocking time
Dynamic zero
clearance range
Digital filtering level
AD sampling rate
Pre-filter grade
Time between
photoelectric dust
removal
Duration of
photoelectric dust
removal
Buzzer buzzer type
Buzzer sounding mode
Buzzer delay time
Over/Under Alarm
Popup Window
Over/Under Alarm
Recorded
Maximum time an item is on the scale
From the discharge photoelectric induction to the material
time, more than this time alarm
Range of zeroing of the weighing platform during the weight
checking process
0 to 9 can be set
120 beats per second 240 beats per second 480 beats per
second
0 to 20 optional
When the system runs to the set value, the photoelectric dust
removal begins
The output time of the photoelectric dust removal switch
There are four types to choose from, which are undererror,
out-of-error, unqualified, and qualified
There are three ways to choose from, long buzzer, off, and
delay
The delay time is 0.000-10.000S
The pop-up window displays the alarm information when the
error is not suspended
Over/under tolerance alarm is recorded in alarm record
37
CW-100G (C01+MCGS)