Wheel - Haulotte H12 SX Maintenance Book

Replacement-Tightening

Wheel

Replacement-Tightening
Wheel
1 - You will need
• Standard tool kit
• Protective goggles
• Gloves
• Jack
• Hoist
• Torque spanner
2 - Preliminary procedure
1. Place the machine in maintenance configuration.
configuration
3 - Criteria of replacement
Replace the wheels and the tires if any of the following conditions exist :
• Presence of cracks, damage, deformation or other faults on the hub
• Damage to the tire :
• Cut or hole > 3 cm (2 in) in the rubber side wall.
• Blister or pronounced lump on the external and lateral wall.
• Damaged wheel stud.
• Damage or wear on the side wall to the extent that the reinforcing wire is visible.
• Nonlinear wear of the ground contact surface greater than 10 %.
4001015340 E 12.18
M006
• Place barriers around the perimeter of the work area
3.3.1 -Placing the machine in maintenance
USA / GB 69