Chapter 4. Project Workspace; Introduction; Creating A New Project Workspace - Renesas M3T-ICC740 Tutorial Manual

4.1. Introduction

High-performance Embedded Workshop is an integrated development tool that allows the user to write, compile, program and debug a
software project on any of the Renesas Microcontrollers. High-performance Embedded Workshop will have been installed during the
installation of the software support for the Renesas Starter Kit product. This manual will describe the stages required to create and debug
the supplied tutorial code.

4.2. Creating a new Project Workspace

Start High-performance Embedded from the Windows Start Menu, Start ¦ All Programs ¦ Renesas ¦ High-Performance Embedded
Workshop
Open a new tutorial workspace from the [File -> New Workspace...] menu or select 'Create a new project workspace' when presented with
the 'Welcome!' dialog.
The example above shows the New Project Workspace dialog with the RSKM38D5 selected.
•
Select the 740 CPU Family and "IAR ICC740" Toolchain.
•
Select the "RSKM38D5" Project type from the left-hand Projects list.
•
Enter a Workspace Name; all your files will be stored within a folder called c:\WorkSpace\<your_name>
•
The project name field will be pre-filled to match the workspace name above; you can change this name if you wish.
Note: High-performance Embedded Workshop allows you to add multiple projects to a workspace. You may add the
sample code projects later so you may wish to choose a suitable name for the Tutorial project now.
•
Click <OK> to start the Renesas Starter Kit Project Generator wizard.

Chapter 4. Project Workspace

4