RAJ306101 RSSK User's Manual
Chapter 5. Emulator Function
5.1.3
Renesas Flash Programmer
1. Supply power to Evaluation Board, then connect to PC by USB cable.
2. Execute Renesas Flash Programmer, then connect from menu "File" > "New Project..." in reference to
Figure 5-5.
Note.1
3. Select HEX file, then click "Start" in reference to Figure 5-6 to write firmware.
Figure 5-5 Create New Project (RAJ306101)
Figure 5-6 Firmware Write (RAJ306101)
Note.1: This document is confirmed using Renesas Flash Programmer V3.11.02.
R12UZ0129EJ0100
Rev.1.00
Page 52 of 55
Nov 1, 2023