RX72M CPU Card with RDC-IC User's Manual
4.3
Connecting Motor and Board
This product is equipped with an encoder signal input connector (CN4) and a resolver connector (CN14). Connect to the
motor according to the sample code you have written in flash.
Also, connect the motor to the motor connection connector (CN2) on the INV-BRD.
4.4
Connecting Power Supply
The INV-BRD provides a terminal block (CN1) as a connector for supplying power to the board. Connect the positive
output of the stabilized power supply to pin 1 ("+" silk) of CN1 and the negative output to pin 2 ("-" silk) with a cable.
R12UZ0098EJ0100 rev.1.00
Aug. 23, 2021
Figure 4-3 Motor and board Connection
Figure 4-4 Power Supply Connection
Page 11 of 27