Environmental Requirements Table - Cisco D9477-1 Installation And Operation Manual

Environmental Requirements Table

Item
Operating Temperature
Storage Temperature Range
Operating Humidity
Vibration Susceptibility
Electrostatic Shock Susceptibility No damage sustained from five discharges of 15 KV IEC
78-717866-01 Rev D
Specification
0° to 50°C (32° to 122°F)
CAUTION:
Avoid damage to this product! Your warranty is
void if you operate this product above the
maximum specified operating temperature.
Use caution when installing wiring and racks to
avoid obstruction of air flow into the side air
vents of the MQAM, or out of the vent fans at
the MQAM side panel.
Important: You must use the supplied notched rack
mounts (part numbers 734845 and 734846) to mount the
MQAM in the rack. These rack mounts allow correct air
circulation through the unit.
-10° to 70°C (14° to 158°F)
5 to 95%, non-condensing
No data errors with a chassis vibration of 0.5 Gs. No data
errors with a vibration frequency of 10 to 400 Hz
electrostatic discharge model (150pF + 150 Ω) to all
exposed connections
Installation and Operation Requirements
87