Select An Rf Module; Selecting An Rf Module - Cisco D9477-1 Installation And Operation Manual

Select an RF Module

The RF SEL key allows you to select the default screens for each of the RF Modules
(channels).

Selecting an RF Module

Follow these steps to change the selected RF Module.
Press the RF SEL key on the front panel of the MQAM. The Default Status screen
1
changes to the next available RF Module.
Press the RF SEL key to scroll through the list of RF Modules until you select the
2
desired module.
Note: The selected RF Module is saved as the Default Status screen.
78-717866-01 Rev D

Select an RF Module

61