Cisco D9477-1 Installation And Operation Manual page 97

Error Condition LCD Messages
RF Module Code

Download Failure
Screen
Unable to Boot

Successfully

78-717866-01 Rev D
Unable to TFTP RF Code
The following message appears if the MQAM is
unable to download the RF module code
execution files for boot mode 1 or boot mode 2
from the TFTP server.
Unable to TFTP RF
Restarting...
The MQAM then automatically reboots.
Unable to perform BootP (Boot Mode 1)
The following message appears if the MQAM is
in boot mode 1 while unable to perform a
successful boot process (BootP).
Unable to perform BootP
Continuing Startup...
The MQAM then starts the application program.
Unable to perform Bootp (Boot Mode 2)
The following message appears if the MQAM is
in boot mode 2 while unable to obtain a
successful BootP.
Unable to perform BootP
Restarting...
The MQAM then automatically reboots.
Troubleshooting Boot Screen Error Messages
Check and Correct
Check the

configuration file.
Check for an incorrect

IP address, boot mode,
or DNCS address.
Reinstall the MQAM

Code
package on the DNCS
if all MQAMs have
this error condition.
Check IP connectivity.

Contact Cisco Services.

Verify that the

Ethernet port is
connected and that the
MAC address for the
unit matches the MAC
address listing on the
DNCS.
Contact Cisco Services.

81