LCD Alarm Display
The front panel of the MQAM displays alarm messages in the following standard
display.
Input1
The alarm message appears on the second line of the display. In this example, the
message indicates a loss of signal to the ASI Input, which is a major alarm condition.
Reading the Display
To display the list of active alarms, follow these steps.
1
Press OPTIONS. The Alarm Status Level screen appears.
Note: Each alarm description appears for approximately 1 second before
displaying the next alarm. If no alarms are active, a NO Active Alarms message
appears.
2
Press ENTER. The default screen appears.
78-717866-01 Rev D
Alarm at 11:51:40
loss of
signal
Alarm at 11:51:40
Input1
loss of
signal
Alarm Conditions
71