Table of Contents
Advertisement
Basic Parameters Tab
The Basic Parameters tab on the Set Up MQAM window appears when you do the
following:
1
From the DNCS Administrative Console, select one of the following tabs:
For SR 2.7/3.7/4.2 and later, click the Network Element Provisioning tab.
For SR 2.5/3.5/4.0 and earlier, click the Element Provisioning tab.
Click QAM. The QAM List window opens.
2
3
From the File menu of the QAM List window, choose New and select MQAM.
The Set Up MQAM window opens, with the Basic Parameters tab selected.
The Basic Parameters tab allows you to identify the MQAM, assign it to a headend,
and specify the modulation type for each of the four RF Out ports. The following
diagram shows an example of the Basic Parameters tab of the Set Up MQAM
window.
78-717866-01 Rev D
Basic Parameters Tab
31
Advertisement
Table of Contents
Troubleshooting
