Viewing The Encryption Mode; Viewing The Mac Address; Viewing The Netmask Screen; Viewing The Ip Address - Cisco D9477-1 Installation And Operation Manual

Chapter 4 Operating the Modulator

Viewing the Encryption Mode

The Encryption Mode screen displays the current encryption mode setting. The
mode is saved in the NVRAM and is selected during the boot process. To display the
current encryption mode, complete the following steps.
1 Press OPTIONS until the Encryption Mode screen appears.
2 Press ENTER to return to the default screen.

Viewing the MAC Address

To view the MAC address used for MQAM Ethernet communication, complete the
following steps.
1 Press OPTIONS until the MAC Address screen appears.
Press ENTER to return to the default screen.
2

Viewing the Netmask Screen

To display the currently assigned Netmask for all Ethernet communications,
complete the following steps.
Press OPTIONS until the Netmask screen appears.
1
2 Press ENTER to return to the default screen.

Viewing the IP Address

To display the currently assigned IP address for all Ethernet communications,
complete the following steps.
1 Press OPTIONS until the IP Address screen appears.
Press ENTER to return to the default screen.
2
56 78-717866-01 Rev D