Cisco D9477-1 Installation And Operation Manual page 98

Chapter 5 Troubleshooting the MQAM
Error Condition LCD Messages
Unable to

Download
Configuration File
from TFTP Server

82
Unable to TFTP Config File (Boot
Mode 1)
The following message appears when in boot
mode 1 and the MQAM is unable to download
the configuration file from the TFTP server.
Problem with Config File
Continuing Startup...
The MQAM then starts the application program.
Unable to TFTP Config File (Boot Mode 2)
The following message appears when in boot
mode 2 and the MQAM is unable to download
the configuration file from the TFTP server.
Problem with Config File
Restarting...
The MQAM then automatically reboots.
Check and Correct
Verify that the

configuration file
provisioned on the
DNCS is present in the
DNCS File system.
An incorrect DNCS

configuration may
cause this error
condition.
Contact Cisco Services.

78-717866-01 Rev D