Caution: Before You Remove A Power Supply, Ensure That You Have Power Supplies Sufficient To Power The Router Left In The Chassis. See "Power Requirements For Mx10016 Components" On Page; Ensure You Understand How To Prevent Esd Damage. See "Prevention Of Electrostatic Discharge Damage" On Page; Electrostatic Discharge (Esd) Grounding Strap; Phillips (+) Screwdriver, Number - Juniper MX10016 Hardware Manual

CAUTION:
sufficient to power the router left in the chassis. See
Components" on page
Before you remove an JNP10K-PWR-AC2 power supply from the chassis:
Ensure you understand how to prevent ESD damage. See
on page 303.
Ensure that you have the following parts and tools available to remove a JNP10K-PWR-AC2 power supply
from an MX10016 router:
Heat protective gloves able to withstand temperatures of 158°F (70°C)

Electrostatic discharge (ESD) grounding strap

Phillips (+) screwdriver, number 1

Replacement power supply or a cover panel for the power supply slot
CAUTION:
operational. Either replace the power supply promptly or install a cover panel over the
empty slot.
To remove a JNP10K-PWR-AC2 power supply from an MX10016 router:
Before you remove a power supply, ensure that you have power supplies
97.
Do not leave the power supply slot empty for a long time while the router is
"Power Requirements for MX10016
"Prevention of Electrostatic Discharge Damage"
180