Solving Problems With The Image Or Sound - Epson PowerLite 1725 User Manual

Solving Problems
128
You hear the projector's fan after the power has been turned
off.
If is set to
Standby Mode
after the projector has cooled down. See page 112 for more
information about this setting.
Solving Problems with the Image
or Sound
No image appears on the screen.
Check that the P
■ Power
■ The projector may be in standby or sleep mode. If the P
light is orange, press the P
on.
If the power was switched off and then on again, the projector
■
may be cooling down. Wait until the P
flashing and remains orange; then press the P
again.
Press the
■ A/V Mute
the picture has not been turned off temporarily.
Open the A/V Mute slide, if it is closed.
■
■ The attached computer may be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.
If you are projecting from a DVD player or other video source,
■
make sure you turn it on and press its
If you're projecting through your computer's USB port, make
■
sure the
USB Type B
(see page 112). The USB display feature is not available
Display
for Windows 98, Windows Me, or Macintosh.
, the fans continue to operate
Network On
light is green, not flashing.
button to turn the projector
Power
Power
button on the remote control to make sure
Play
setting in the Extended menu is set to
Power
light stops
button
Power
button.
USB