Quick Start Guide; Changes To Quick Start Guide Section - Analog Devices EVAL-AD7606BFMCZ User Manual

EVAL-AD7606BFMCZ

QUICK START GUIDE

To quickly evaluate the AD7606B
steps:
1. Download and install the
(ACE) software from the
that the EVAL-SDP-CH1Z
from the USB port of the PC while installing the software.
Restart the PC after the installation process completes. For
complete software installation instructions, see the
Software Installation section.
2. Ensure that the various link options are configured as
outlined in Table 2.
3. Connect the EVAL-SDP-CH1Z
EVAL-AD7606BFMCZ. Ensure that these boards are
connected firmly together.
User Guide
ADC, take the following
Analysis Control Evaluation
AD7606B product pages. Ensure
(SDP-H1) is disconnected
(SDP-H1) board to the
4. By default, the power for the EVAL-AD7606BFMCZ is
supplied by the
board. A number of power options are available, see the
Power Supplies section for more information.
5. Connect the
supply and to the PC via the USB cable. Choose to
automatically search for the drivers for the
CH1Z (SDP-H1) if prompted by the operating system.
6. Launch the
Devices subfolder in the Programs menu.
7. Connect an input signal via the CH1 to CH8 terminal
blocks.
Rev. A | Page 3 of 15
EVAL-SDP-CH1Z (SDP-H1) controller
EVAL-SDP-CH1Z (SDP-H1) to the 12 V
ACE evaluation software from the Analog
UG-1225
EVAL-SDP-