Analog Devices EVAL-AD7606BFMCZ User Manual page 11

EVAL-AD7606BFMCZ
Apply Selected
In some cases, the values of all registers are changed, but the
user wants to implement changes on a selected register only.
Click Apply Selected to write the new value on the selected
register to the AD7606B.
Read All
Clicking Read All results in a read of the values of all the
registers from the chip.
Read Selected
Clicking Read Selected results in a read of the selected register
from the chip.
User Guide
Rev. A | Page 11 of 15
Reset Chip
Clicking Reset Chip causes the software to reset the AD7606B.
Diff
Clicking Diff checks for difference in register values between
software and chip.
Software Defaults
To revert the register values back to their defaults, click
Software Default, and then click Apply Changes to write to
the AD7606B.
UG-1225