Fujitsu Airstage J-IVS AJ 040LCLDH Series Design & Technical Manual page 837

2. Function number to be confirmed is displayed on the remote controller LCD.
Press the SET TEMP.
is pressed, it switches between the left digit and the right digit.
Press the TIMER set (-) button.
TIMER set (-)
Case1: When setting number is one digit
Example) Function number: 30; Setting number: 01
OPERATION lamp
(Green)
TIMER lamp
(Orange)
FILTER lamp
(Red)
2-4. Indoor unit (setting by wireless remote controller)
or button to adjust the setting number. Each time the MODE button
0.5sec ON / 0.5sec OFF
3 times 3 times
OFF
0.5sec ON / 0.5sec OFF
1 time 1 time
(Phase1) : 12sec (Phase1) : 12sec
Case2: When setting number is two digits
Example) Function number: 26; Setting number: 31
OPERATION lamp
...
(Green)
TIMER lamp
(Orange)
FILTER lamp
...
(Red)
- (07-91) -
0.5sec ON / 0.5sec OFF
2 times
OFF
0.5sec ON / 0.5sec OFF
6 times
OFF
0.5sec ON / 0.5sec OFF 0.5sec ON / 0.5sec OFF
1 time 3 times
(Phase1) : 12sec (Phase2) : 12sec
2. Function settings
...
...
...