Fujitsu Airstage J-IVS AJ 040LCLDH Series Design & Technical Manual page 835

6. Indoor unit lamps will indicate the function setting number as follows:
Case 1: When setting number is one digit
Indoor unit lamps will indicate the function setting number on the OPERATION (Green) lamp,
TIMER (Orange) lamp, and FILTER (Red) lamp.
OPERATION
(Green)
Flashes times of
function numbers
(the left digit)
When the number setting is "0", TIMER lamp and FILTER lamp will not flash.
Case 2: When setting number is two digits
Indoor unit lamps will indicate the function setting number on the OPERATION (Green) lamp,
TIMER (Orange) lamp, and FILTER (Red) lamp.
Phase1
OPERATION
(Green)
Flashes times of
function numbers
(the left digit)
Phase2
OPERATION
(Green)
OFF
When the number setting is "0", TIMER lamp and FILTER lamp will not flash.
RELATED LINKS
"Function details" on page 07-108
¢ Confirmation of function setting
To confirm the function setting is properly configured, press the TIMER set (+) button.
TIMER set (+) button
2-4. Indoor unit (setting by wireless remote controller)
TIMER FILTER
(Orange) (Red)
Flashes times of Flashes times of
function numbers setting numbers
(the right digit) (the right digit)
TIMER FILTER
(Orange) (Red)
Flashes times of Flashes times of
function numbers setting numbers
(the right digit) (the right digit)
The indication of "Phase1" and
"Phase2" is alternately repeated.
TIMER FILTER
(Orange) (Red)
OFF Flashes times of
setting numbers
(the right digit)
Example) Function number: 30; Setting number: 01
OPERATION lamp
(Green)
3 times
TIMER lamp
(Orange)
0.5 sec ON / 0.5 sec OFF
FILTER lamp
(Red)
Example) Function number: 26; Setting number: 31
0.5 sec ON / 0.5 sec OFF
OPERATION lamp
(Green)
0.5 sec ON / 0.5 sec OFF
TIMER lamp
(Orange)
0.5 sec ON / 0.5 sec OFF 0.5 sec ON / 0.5 sec OFF
FILTER lamp
(Red)
Beeps are emitted intermittently as follows:
Correct:
Wrong:
(3 sec)
- (07-89) -
0.5 sec ON / 0.5 sec OFF
3 times
OFF
1 time 1 time
(Phase1) : 12 sec (Phase1) : 12 sec
2 times
OFF
6 times
OFF
1 time 3 times
(Phase1) : 12 sec (Phase2) : 12 sec
(2 short beeps,
1 long beep, 4 short beeps,
and 1 long beep)
(2 short beeps and 1 long beep)
2. Function settings
...
...
...
...
...