Fujitsu Airstage J-IVS AJ 040LCLDH Series Design & Technical Manual page 793

5. Touch "Setting" on the Function Setting screen.
6. Setting screen of "Setting No." is displayed. Set the Setting No. by touching "
ting range is from "00" to "63".)
When "OK" is touched, the Function Setting verification screen is displayed.
7. Touch "Yes" on the verification screen.
After the Setting screen is displayed, the display returns to the Function Setting screen.
 Refrigerant circuit address setting
1. Touch "Address" on the Function Setting screen.
2. Address screen is displayed. Select the address of the indoor unit whose function number is to
be set by touching "
When "OK" is touched, the display returns to the Function Setting screen.
1-4. Address setting by remote controller
Function Setting
Address
Function No.
Setting No.
Back
Function Setting
Address
Function No.
Setting No.
12
Cancel
Example: When indoor unit address data "12" is set
Function Settung
Function setting will be performed. OK?
No
Function Setting
Address
Function No.
Setting No.
Back
" or " ". When setting at all the indoor units, touch "All".
Address
002–01
Cancel
- (07-47) -
[002–01]
[01]
[00]
Setting
[002–01]
[01]
OK
Yes
[002–01]
[00]
[00]
Setting
All
OK
" or " ". (Set-
1. System settings