Table of Contents
Advertisement
¢ Group
This function is used when operating a multiple number of remote controller group at a time from
System controller, Touch panel controller, or Central remote controller.
Example:
Refrigerant
system 1
Heat
Recovery
system
Refrigerant
system 2
Heat pump
system
System
controller
Group A: "Group" is possible with only one indoor unit.
Group B: "Group" is possible with spanning the RB groups.
Group C: "Group" is possible with spanning the RB group and indoor unit of cooling only type.
Group D: "Group" is possible with spanning the refrigerant systems.
NOTE: The contents of setting may not be reflected by operation status. (B, C, D group)
2-21. Group control method
A
D
- (05-111) -
B
C
2. Control units
Advertisement
Chapters
Table of Contents
