Fujitsu Airstage J-IVS AJ 040LCLDH Series Design & Technical Manual page 27

1. Model selection and capacity calculation
1-1. Model selection procedure
Selection of indoor units
Selection of required optional parts
Selection of outdoor units
Selection of controllers
Selection of adapter and convertor
Selection of branch kit
Selection of other optional parts
End
1-1. Model selection procedure
Refer to following information:
•
•
↓
Refer to
MATION on page 01-7.
↓
Refer to following information:
•
•
↓
Refer to "Controllers" of
GENERAL INFORMATION on page 01-7.
↓
Refer to "Adapter/Convertor/Maintenance tool" of
tional parts"
page 01-7.
↓
Refer to following informations:
•
•
•
↓
Refer to "Others" of
ERAL INFORMATION on page 01-7.
↓
"Indoor units" of "Model lineup"
DOOR UNITS on page 03-1
"Indoor unit and outdoor unit selection procedure"
page 02-2
"Optional parts" in Chapter 1. GENERAL INFOR-
"Outdoor units" of "Model lineup"
DOOR UNITS on page 03-1
"Indoor unit and outdoor unit selection procedure"
page 02-2
"Optional parts"
in Chapter 1. GENERAL INFORMATION on
"Outdoor unit branch kit" of
ter 1. GENERAL INFORMATION on page 01-7
"Separation tube" of "Optional parts"
GENERAL INFORMATION on page 01-7
"Header" of "Optional parts"
INFORMATION on page 01-7
"Optional parts"
- (02-1) -
in Chapter 3. OUT-
on
in Chapter 3. OUT-
on
in Chapter 1.
"Op-
"Optional parts" in Chap-
in Chapter 1.
in Chapter 1. GENERAL
in Chapter 1. GEN-
1. Model selection and capacity calculation