Preheating (Before Weighing-In) - KERN DLT-N Operating Manual

Electronic moisture analyser

Table of Contents

11.1.3 Preheating (before weighing-in)

If needed, the function „preheating" can be enabled for preheating the sample

chamber prior to beginning the actual measurement.

A preheated device may affect the consistency of the results as the device keeps the

same temperature status for each measurement. Preheating will take place up to the

point of measuring, in standby mode (For setting see chap. 7, [2]) including after

finished measuring.

For standard applications preheating normally is not required.

Tap < Preheating > in dropdown menu

(See chap. 11.1).

<Off>

Function deactivated

<On>

Function activated

Procedure when function is enabled:

Prior to starting the measurement,

the instrument starts heating up on

the set drying temperature.

If necessary close the sample

chamber, preheating will start.

You may stop preheating during the

preheating period by tapping

and after weighing the sample

measurement can be started.

DLT_N-BA-e-1421

Table of Contents