Peripheral Equipment - KERN DLT-N Operating Manual

10.3 Peripheral equipment


Tap <Peripheral>, see chap: 10. The available settings will be displayed.
< Printer selection >
< Print at stability >
<Print heading>
As headline can be defined 4
lines with 40 characters each
< Line feed>
Line feed at the end of the
printout.
<GLP>
<Print time and date>
(for disabled GLP function
only)
36
Settings:
DPP-250 Setting for KERN YKC-01
DPP-350
Settings:
On Stability check before data transfer on
Off Stability check before data transfer off
Settings:
Off Printout header line disabled
On Printout header line enabled
Line 1 In setting <ON> tap corresponding line and
enter your text in the displayed input window,
Line 2
then import by pressing <OK>.
Line 3
Line 4
Settings:
Enter desired number in numeric input window.
Settings:
On
GLP-printout enabled
Off GLP-printout disabled
Settings:
On Print date/time on test certificate
Off Do not print date/time on test certificate
DLT_N-BA-e-1421