Heating Module Settings - KERN DLT-N Operating Manual

10.1 Heating module settings


Tap <Heater parameters>, see chap.: 10. The available settings will be
displayed.
<Standby-temperature>
<Start mode>
<Start delay>
DLT_N-BA-e-1421
Settings:
Off
Switched off
Standby
The numeric input window will be
Temperature
displayed. Enter required
temperature
selectable 35°C – 100°C.
To import press <OK>. The display
returns to the previous screen.
Settings:
Manual Measuring will start as soon as you
tap the control button „OK"
Automatic
Measurement will start automatically
after closing the sample chamber
Settings:
Enter the desired time, selectable from 0-30 sec. in the
numeric input window.
To import press <OK>. The display returns to the
previous screen.
.
33