Operating
Linux Yocto
System
Support
Default Interfaces
I2C
2x I2C interfaces which are derived from the SoC
LAN, USB
Display
24Bit RGB with up to WXGA (1366 × 768) @60 fps
SD-Card
2x SDIO 4Bit
UART
3x UART, one is used for serial console by default
GPIO
16x General Purpose Inputs/Outputs (GPIO)
PWM
2x from SoC
other
1x CAN
Connectivity
Power
Consumption
Maximum Power consumption of the board is < 1 W
Input Voltage
Single supply +3.3V
3.2. Environmental Conditions
Table 3: Environmental Conditions
Operating
Storage
www.kontron-electronics.de
2x 100Mbit-Ethernet
2x USB2.0 OTG
PWM8: used for Buzzer on baseboard
PWM7: used for TFT backlight on baseboard
industrial: -40°C to 85°C
relative humidity (non-condensing) 10% to 93% at 40°C
commercial grade: -40°C to +85°C
relative humidity (non-condensing) 10% to 93% at 40°C
SL iMX6UL/ULL - Rev. 0.4
// 14