8.
9.
10.
ELEVATOR PUSHROD INSTALLATION
Locate items necessaryto install rudder
pushrod.
1.
- Install the elevator control horn using
the same method as with the aileron con-
trol horns.
- Position the elevator control horn on
the both side of elevator.
2.
Elevator control horn
head one clevis and M2 lock nut on
to each elevator control rod. head the
horns on until they are lsh with the ends
of the control rods.
Elevator and rudder pushrods assembly
as pictures below.
3.
4.
5.
M2 clevis
Fuel tubing
500mm
Elevator pushrod
Hex nut
31