Fortinet FortiGate-7000F Series System Manual page 60

FortiGate-7081F System Management Module
Action
chassis
Get chassis sttatus
Display the LAN
configuration.
Available on the
passive module.
Set LAN
configuration. The
kgkey and krkey
options are used for
RCMP+.
Enable or disable all
LAN interfaces.
Set fan levels.
Change or switch the
active fan set.
Change LED
settings.
Display HPM.1
status.
Run an HPM.1
upgrade.
FortiGate-7081F 7.0.5 System Guide
SMC CLI Commands
N/A
lan print <channel>
lan set <channel> ipaddr <ip>
[<netmask>]
lan set <channel> macaddr <mac>
lan set <channel> defgw ipaddr
<ip>
lan set <channel> defgw macaddr
<mac>
lan set <channel> kgkey <value>
lan set <channel> krkey <value>
lan disable <channel>
lan enable <channel>
fan_min_level <level>
fan_max_level <level>
<level> range is 0 - 20.
N/A
N/A
N/A
Fortinet Technologies Inc.
IPMI Commands
chassis status
lan set help
(use this command to display online help for
LAN settings)
fortinetoem param set 0 1
fortinetoem param set 0 0
N/A
picmg led set help
(use this command to display online help for
LED settings)
hpm check
hpm upgrade <.img> hpm upgrade
<.img> all activate
60