Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fortinet FortiGate Rugged 50G
Summary of Contents for Fortinet FortiGate Rugged 50G
- Page 1 QuickStart Guide FortiGate Rugged 50G FGR-50G...
-
Page 2: Package Contents
1x Digital I/O Connector 1x DC Power Connector Experience simplified cloud provisioning, security analytics, remote access, hosted log retention and reporting at https://fortigate.forticloud.com FortiExplorer Go Rapidly provision, deploy and manage your Fortinet Security Fabric Platform, free on iOS and Android: https://docs.fortinet.com/product/fortiexplorer-go/... -
Page 3: Power Installation
Power Installation Warnings Wiring FortiGate Ru 12-125V • The redundant DC inputs support negative ground (+12V to +54V DC) and positive ground (-12V to -54V DC), 1.67A Max • With the optional failover redundancy, if the primary DC input fails, the secondary DC input will supply power •... -
Page 4: Din Rail Mounting Bracket
Dimensions DIN Rail Mounting Bracket NOTE: Drawings are for dimensional purposes only. Refer to pg12 for connector details. 69mm (2.72in) 122.0mm (4.80in) 111mm (4.37in) Side Panel Position Rear Panel Position (Includes 4x M3 Pan Head Screws) -
Page 5: Bios Options
Rear Panel Position BIOS Options The default CPU speed is set to high performance mode. Low power mode 37.38 can be set in the BIOS options. See the Admin Guide for more information at https://docs.fortinet.com 23.37 20.00 57.0 Side Panel Position... - Page 6 Setup FortiExplorer Go Speed (default): 9600 Data bits: USB Console Cable Stop bits: (available for purchase Parity: None Flow Control: None Console Port Install Enable Follow the on-screen FortiExplorer Go Bluetooth instructions Port 1 If Static IP: 192.168.1.1/24 Ethernet Cable...
- Page 7 Green: Data activity Amber: 100 Mbps Off: No link established Off: 10 Mbps or not connected SIGNED FortiGate Rugged 50G SIGNED FIRMWARE BIOS Security Level FIRMWARE Controlled by Signed Firmware Switch, see Admin Guide at https://docs.fortinet.com 12-54V High: Unsigned firmware blocked (default)
- Page 8 This declaration is only valid for Fortinet products (including combinations of software, firmware and hardware) provided by Fortinet or Fortinet’s authorized partners to the end-customer directly for use within the EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinet’s authorized partners may not comply with EU Directives and Fortinet makes no assurances for such products.
- Page 9 Note: The full Declaration of Conformity for this product is available in the link below: https://site.fortinet.com/ProductRegulatory/EU UK Conformity Assessed (UKCA) – United Kingdom The product transmits within the frequency ranges and less than or equal to the power listed below:...
- Page 11 Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s SVP Legal and above, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet.
Need help?
Do you have a question about the FortiGate Rugged 50G and is the answer not in the manual?
Questions and answers