Advertisement

QuickStart Guide
FortiGate Rugged 60F Series
FGR-60F and FGR-60F-3G4G

Advertisement

Table of Contents
loading

Summary of Contents for Fortinet FortiGate Rugged 60F Series

  • Page 1 QuickStart Guide FortiGate Rugged 60F Series FGR-60F and FGR-60F-3G4G...
  • Page 2: Before You Begin

    Copyright© 2022 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners.
  • Page 3 Box Includes- FGR-60F Front Panel - FGR-60F FortiGate Rugged 60F FortiGate Rugged 60F Shared Shared BYPASS BYPASS SFP1 SFP1 STATUS STATUS SFP1 SFP1 SFP1 SFP1 SFP2 SFP2 SFP2 SFP2 POWER POWER CONSOLE CONSOLE WAN1 WAN1 WAN2 WAN2 SFP2 SFP2 CONSOLE CONSOLE WAN1 WAN1...
  • Page 4 Rear Panel - FGR-60F SERIAL RESET DC2 12-125V DC1 12-125V RESET button Ground Screw (#12 AWG) optional ground connection Earth Ground (Lug Plate) ground connection SERIAL Port (DB9) RS232 connection Power Supply Indicators (DC1 & DC2) By default, Alarm is enabled in the OS* Green: Power supply is on Red: Alarm is on*;...
  • Page 5 Front - FGR-60F-3G4G Box Includes - FGR-60F-3G4G FortiGate Rugged 60F 3G4G FortiGate Rugged 60F 3G4G MAIN MAIN Shared Shared BYPASS SFP1 BYPASS SFP1 STATUS STATUS SFP1 SFP1 SIM1 SIM1 SFP2 SFP2 POWER SIM2 POWER SIM2 CONSOLE WAN1 WAN2 SFP2 CONSOLE WAN1 WAN2 SFP2...
  • Page 6 Red: Alarm is on*; power supply not providing power or not connected Off: Power supply is off For more information on Wireless WAN Configuration, please NOTE: Power Terminals (2 Pin Male) Redundant failover, 12V to 125V DC, 2A Max, see pg12 refer to the FortiOS Handbook at docs.fortinet.com...
  • Page 7: Installation

    Installation Secure the earth ground terminal of the device to chassis Power Connections ground or earth ground Warnings • The DC input supports negative ground (+12V to +125V DC) and positive ground (-12V to -125V DC) power sources • Terminal +(A) is the high voltage potential pin and Terminal -(B) is the lower voltage potential pin SIM1 SERIAL...
  • Page 8: Internet Connections

    SFP Ports Ferrite Core Installation To install the SFP transceivers: To install the supplied ferrite cores: 1. Open a ferrite core and loop the power cables around Slide the SFP into the cage socket until it clicks into place Lift the latch to lock the SFP 2.
  • Page 9 Wall Mount Option DIN Rail Option To attach the unit to a wall: The FortiRugged-60F supports DIN rails with 35mm(1.4in) x 15mm(0.6in) and 35mm(1.4in) x 7.5mm(0.3in) sizes . The minimum radiating distance 1. Mark the location on the wall where the anchors will be located between DIN rail devices is 100mm(3.9in).
  • Page 10 Rack/Rail Mount Option Your device is already equipped with feet for a flat surface. You can Fortinet carries a variety of standard and custom rack and rail mount optionally install the extended grey feet for more surface clearance. accessories, including a rack mount tray kit, SP-RACKTRAY-02.
  • Page 11: Setup Options

    Data bits: and FortiExplorer, see the Admin Guide: Stop bits: Parity: None USB Console Cable Flow Control: None http://docs.fortinet.com (available for purchase Console Port Management Computer Note: For a detailed CLI guide, go to docs.fortinet.com Port 1 Management Computer FortiExplorer Ethernet Cable Note: For static IP configuration, use 192.168.1.1 with subnet mask...
  • Page 12: Bios Options

    WiFi or USB Setup The FortiRugged 60F provides an option in the BIOS menu to set the CPU speed from high performance mode (default) to low power mode. See the admin guide on docs.fortinet.com for more information. HTTPS 1. During OS bootup,...
  • Page 13 Directives and/or spectrum regulation. Any Fortinet products not obtained directly from https://site.fortinet.com/ProductRegulatory/UK Fortinet or Fortinet’s authorized partners may not comply with EU Directives and Fortinet Ambient operating temperature: -40°C to 75°C This device complies with Part 15 of FCC Rules. Operation is subject to the following...
  • Page 15 Fortinet.com...

This manual is also suitable for:

Fortigate rugged fgr-60fFortigate rugged fgr-60f-3g4g

Table of Contents