Connecting To The Smc Sdi Cli Of The Fpm In Slot 3; Changing The Smm Admin Account Password; Fortigate-7081F Chassis Slots Ipmb Addresses - Fortinet FortiGate-7000F Series System Manual

Hide thumbs Also See for FortiGate-7000F Series:
Table of Contents

Advertisement

FortiGate-7081F System Management Module
5. Login with an administrator name and password.
The default is admin with no password.
For security reasons, it is strongly recommended that you change the password.
6. When your session is complete, enter the exit command to log out.
Connecting to the SMC SDI CLI of the FPM in slot 3
Use the following steps to connect to the FortiOS CLI of the FPM in slot 3:
1. Using the console cable supplied with your FortiGate-7081F, connect the SMM Console 1 port on the FortiGate-
7081F to the USB port on your management computer.
2. Start a terminal emulation program on the management computer. Use these settings:
Baud Rate (bps) 9600, Data bits 8, Parity None, Stop bits 1, and Flow Control None.
3. Press Ctrl-T to enter console switch mode.
4. Press Ctrl-R to switch to the SMM SMC SDI CLI switching mode.
5. Repeat pressing Ctrl-R until you have connected to slot 3. Example prompt:
<Switching to Console: FPM03-MC (9600)>
6. Login with an administrator name and password.
The default administrator name and password are admin/admin.
For security reasons, it is strongly recommended that you change the password.
7. You can begin entering commands at the admin@FPM03-MC # prompt.
8. When your session is complete, enter the exit command to log out.

Changing the SMM admin account password

Use the following procedure to change the SMM admin account password.
1. Enter the following command to show all users and their user IDs.
user list
The output should show that the admin user has a user ID of 2.
2. Use the command user set password <user-id> [<password>] to add a password for the admin account.
For example:
user set password 2 <password>
3. Enter and confirm a new password for the admin account.
The password should be between 5 and 20 characters long and should include a combination of upper and lower
case letters and numbers.
You can change the admin account password at any time.

FortiGate-7081F chassis slots IPMB addresses

The following table lists the IPMB addresses of the FortiGate-7081F chassis slots.
FortiGate-7081F 7.0.5 System Guide
Fortinet Technologies Inc.
53

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FortiGate-7000F Series and is the answer not in the manual?

This manual is also suitable for:

Fortigate-7081f

Table of Contents