Symbols And Signal Words Used; Safety; General Safety Regulations And Obligations - LOGICDATA DCDinline D Manual

1.4

SYMBOLS AND SIGNAL WORDS USED

Safety Notices contain both symbols and signal words. The signal word indicates the severity of the hazard.
CAUTION Danger of material damage and possible additional low risk of injury.
A safety notice with the signal word „Caution" indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
NOTICE
The label NOTICE indicates a situation that will not lead to personal injury, but could
lead to damage to the product or the environment.
NOTICE
Damage due to electrostatic discharge (ESD)

2 SAFETY

2.1

GENERAL SAFETY REGULATIONS AND OBLIGATIONS

In general, the following safety regulations and obligations apply when handling the product:
• The DCDinline -DR actuator may only be operated in a clean and perfect condition.
• Do not remove, change, bridge or bypass any protection, safety or monitoring equipment.
• Do not convert or modify the DCDinline D actuator without written approval
from LOGICDATA.
• In the event of malfunction or damage, the DCDinline D actuator must be
replaced immediately.
• Do not attempt to repair the acuator yourself.
• Hardware replacement is only allowed in a de-energized state.
• For the operation of the system, the national worker protection conditions and the
national safety and accident prevention regulations apply.
DCDINLINE D MANUAL // PAGE 6