Table of Contents
Advertisement
de Home Connect
16.6 Deactivate Wi-Fi on the
device
on
at least 3 seconds
1.
to press.
Set the program to position 4.
2.
a The display shows Con.
Press until the display
3.
oFF shows.
a Wi-Fi is disabled.
Note: If Wi-Fi has been deactivated and
your device was previously connected
to your home network, the connection
will be automatically re-established
when you switch Wi-Fi back on.
16.7 Software update
Pre-condition: The display shows.
Press for about 3 seconds.
1.
Set the program to position 6.
2.
a Appears in the display UPd.
Press.
3.
a The software update will be installed
lates.
a When the display End shows is
the software update is installed.
Note: The software update can take
several minutes. Do not switch off
the device during the software
update.
16.8 Reset network settings of
the device
on
at least 3 seconds
1.
to press.
Set the program to position 5.
2.
a The display shows rES.
Press.
3.
a The display shows Yes.
Press.
4th
52
a The network settings are
set back.
a When the display End shows are
reset the network settings.
Tip: If you want to operate your device
again via the Home Connect app, you
have to re-connect it to the home
network and the
Connect the Home Connect app.
16.9 Data protection
Please note the information on data
protection.
When your device is connected to a
home network connected to the
Internet for the first time, your device
transmits the following categories of
data to the
Home Connect server
(Initial registration):
¡ Unique device identifier (best
based on device keys and the MAC
address of the built-in Wi-Fi
communication module).
¡ Wi-Fi Com-
communication module (for
information technology protection
of the connection).
¡ The current software version and
Hardware version of your home appliance.
¡ Status of any previous
reset to factory settings.
This initial registration prepares the use
of the Home Connect functionalities
and is only required at the point in time
at which you would like to use the
Home Connect functionalities for the
first time.
Note: Note that the Home Connect
functionalities can only be used in
conjunction with the Home Connect
app. Information on
Advertisement
Table of Contents
