Table of Contents
Advertisement
de Troubleshooting
disturbance
"E: 36 / -10"
"E: 36 / -25 / -26"
"E: 10 / -00 / -10 /
- 20 "
flashes.
64
Cause and troubleshooting
Inadmissible extension mounted on the water
drainage hose.
Remove impermissible extensions from the water
▶
drain hose. Connect device
The drain pump is blocked.
→ " Cleaning the drain pump ", page 57
▶
The intelligent dosing system pump is blocked.
Turn off the device.
1.
Clean the pump unit.
2.
→ "Cleaning the detergent drawer", page 55
If the display reappears, call customer service.
3.
→
"Customer service", page 76
Note: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→ "Keys", page 26
Water pressure is low. No
fix possible.
The filters in the water inlet are blocked.
Clean the filters in the water inlet → Page 60.
▶
The tap is closed.
Open the faucet.
▶
The water inlet hose is kinked or pinched.
Make sure that the water inlet hose
▶
is not kinked or pinched.
The detergent drawer is not pushed in all the way.
Slide the detergent drawer up to
▶
Stop a.
Pump unit is not inserted.
Place the pump unit in the detergent drawer.
1.
→ "Cleaning the detergent drawer", page 55
Push in the detergent drawer as far as it will go.
2.
The voltage control system detects impermissible
voltage undershoot.
No fix possible.
▶
Note: When the power supply has stabilized, the
program continues as normal.
Advertisement
Table of Contents
