Connect Tion; Device With Wlan Home (Fd); Network (Wi-Fi) Without Wps - Siemens WM14UP40 Instructions For Use And Assembly

de Home Connect
16.2 Device with WLAN home
network (Wi-Fi) with
Connect the WPS function
Use the WPS function of your router
to connect the device to the home
network.
Pre-condition: If your router
has a WPS function, you can
automatically connect the device to
the WLAN home network (Wi-Fi).
Press for about 3 seconds.
1.
a The display shows Aut.
Press.
2.
Press the WPS button on the
3.
router within 2 minutes.
Note the information in the
documentation for your router.
a flashes in the display.
a The device tries the
To connect to the home Wi-Fi network.
a When the display con shows and
lights up continuously, the device
is connected to the home network.
If the display shows Home
4th
Connect Error, the device is not
connected to the home network.
Check whether the device is
-
within range of the home
network.
Reconnect the device to the
-
WLAN home network (Wi-Fi) with
WPS function.
50
Connect the device to the Home
5.
Connect app. → Page 51
16.3 Device with WLAN home
network (Wi-Fi) without
Connect the WPS function
If your router does not have a WPS
function, you can manually connect
the device to the WLAN home network
(Wi-Fi). The device briefly sets up its
own WLAN network. You can connect
a mobile device to the WiFi network
and transfer the network information
from the WiFi home network (WiFi) to
your device.
Pre-condition: The Home Connect
The app is open and you are signed
in.
For at least 3 seconds
1.
to press.
a The display shows Aut.
Set the program to position 2.
2.
a The display shows SAP.
Press.
3.
a Flashes in the display
a The device sets up its own
WLAN network with the network
name (SSID) HomeConnect ".
Call up WLAN settings in the
4th
mobile device.
.