Siemens WM14UP40 Instructions For Use And Assembly page 73

Table of Contents

Advertisement

disturbance
Inadequate cleaning
effect.
Home Connect wireless
does not work
according to.
No connection with
the home network.
At the water inlet
hose runs water
the end.
At the water outlet
hose runs water
the end.
Odors have formed
in the device.
Cause and troubleshooting
Check whether the detergent used is suitable.
1.
"Detergents and care products", page 42
Empty the dosing container.
2.
→ "Cleaning the detergent drawer", page 55
Clean the dosing container.
3.
Refill the dosing container.
4th
→ "Filling the dosing tank", page 48
Different causes are possible.
Go to www.home-connect.com.
Wi-Fi is turned off.
→ " Activate Wi-Fi on the device ", page 51
Wi-Fi is activated, but the connection to the home
network cannot be established.
Make sure that the home network is available.
1.
Reconnect the device to the home network.
2.
"Device with WLAN home network (Wi-Fi) with WPS
Link function ", page 50
"Device with WLAN home network (Wi-Fi) without
Connecting the WPS function ", page 50
The water inlet hose is not correctly / firmly
connected.
Connect the water inlet hose correctly. Connect
1.
the water inlet hose
Tighten the screw connection.
2.
The water drainage hose is damaged.
Replace the damaged water drainage
hose off.
The water drainage hose is not connected correctly.
Connect the water drainage hose correctly
at. Connection types water drain
Moisture and detergent residues can encourage the
formation of bacteria.
→ " Cleaning the drum ", page 55
When you are not using the device, leave the
The door and the detergent drawer are open so that
any residual water can dry off.
Troubleshooting de
73

Advertisement

Table of Contents
loading

Table of Contents