Table of Contents
Advertisement
16.5 Deactivating Wi-Fi on the
appliance
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 38
The display shows "on".
¡
Press
to change the setting.
▶
The display shows "oFF" if the Wi-
a
Fi is deactivated.
16.6 Resetting the appliance
network settings
Requirements
The Home Connect menu is called
¡
up.
→ "Calling up the Home Connect
menu", Page 38
The display shows rEs.
¡
Press and hold
▶
3 seconds.
The network settings are reset.
a
16.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
The appliance door is opened.
¡
¡
Remote start
Following a power cut.
¡
for at least
is pressed.
Activating remote start
Requirements
The appliance is connected to your
¡
home WiFi network.
The appliance is connected to the
¡
Home Connect app.
A programme is selected.
¡
The appliance door is closed.
¡
The detergent drawer has been
¡
pushed in.
Press Remote start .
▶
lights up and the appliance is
a
enabled for remote start via the
Home Connect app.
Deactivating remote start
Press Remote start .
▶
goes out.
a
16.8 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com.
16.9 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
Home Connect en
39
Advertisement
Table of Contents
