Table of Contents
Advertisement
The device has an aqua sensor.
a The aquasensor checks during
the degree of cloudiness of the
rinsing water and adjusts the
duration and number of rinsing
cycles accordingly.
3.3 Energy saving mode
If you do not operate the device for a
long time, the device automatically
switches to energy-saving mode. All
displays go out and
flashes.
The energy-saving mode is ended by
operating the device again, e.g. B.
open or close the door.
If you do not operate the device in
energy-saving mode for a long time,
the device switches off automatically.
Note: The device does not switch off
automatically when Wi-Fi is activated.
4th
Set up and
Connect
4.1 Unpack the device
Note: Note the information on
security
→
page 4 and avoid property damage
the → Page 11, to use your device
safely.
Set up and connect de
CAUTION!
Objects left in the drum that are not
intended for use in the device can
cause property damage and damage
to the device.
Before operating these items
▶
en and remove the supplied
accessories from the drum.
Completely remove packaging material
1.
and protective covers from the device.
For the environmentally friendly
disposal of the packaging material,
please refer to the information on
the subject
→ "Dispose of packaging",
Page 12.
Check the device for visible damage.
2.
Open the door.
3.
→ "Basic Operation",
Page 44
Remove the accessories from the
4th
drum.
Close the door.
5.
13
Advertisement
Table of Contents
