Home Connect; Setting Up The Home Connect App; Setting Up Home Connect; Activating Wi-Fi On The Appliance - Siemens WG44B209GB User Manual And Installation Instructions

en Home Connect
Press and hold
▶
prox. 3 seconds.
goes out on the display.
a
Home Connect
15 Home Connect
This appliance is network-capable.
Home Connect
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tip: Please also follow the instruc-
tions in the Home Connect app.
Notes
Please note the safety precautions
¡
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
Operating the appliance on the ap-
¡
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
15.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
36
⁠ 3 sec. for ap- The Home Connect app guides
you through the entire login pro-
cess.
15.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
The appliance is receiving signals
¡
from the WLAN home network (Wi-
Fi) at its installation location.
Press and hold Remote Start
1.
approx. 3 seconds.
Follow the instructions in the
2.
Home Connect app.
15.3 Activating Wi-Fi on the
appliance
Press and hold Remote Start
1.
approx. 3 seconds.
Press Remote Start
2.
until the display shows "oFF".
Press ⁠ to activate the Wi-Fi.
3.
The display shows "on".
a
Notes
If the Wi-Fi is activated, the display
¡
alternately shows "on" and the sig-
nal strength of the Wi-Fi connec-
tion.
To exit the Home Connect settings,
¡
press and hold Remote Start
approx. 3 seconds.
15.4 Deactivating Wi-Fi on the
appliance
Press and hold Remote Start
1.
approx. 3 seconds.
Press Remote Start
2.
until the display shows "on".
Press ⁠ to deactivate the Wi-Fi.
3.
The display shows "oFF".
a
for
for
repeatedly
for
for
repeatedly