Table of Contents
Advertisement
de Basic operation
Unfold the laundry and place it in
3.
the drum.
4. Note: Make sure that no laundry
is jammed in the door.
Close the door.
13.6 Add detergent and care
products
For programs in which intelligent
dosing is not possible or desired, you
can add detergent via the
compartment for manual dosing.
Note: Note the information on
security
→
page 4 and avoid property damage
the → Page 11, to use your device
safely.
Tip: In addition to intelligent dosing,
you can also add other care products
for laundry, such as laundry
detergents, to the chamber for
manual dosing. Add stain remover,
starch or bleach. To avoid overdosing
or foaming, do not add any additional
detergent to the manual dispensing
compartment.
Pre-condition: Find out about the
optimal dosage for detergents and
care products.
→ Page 42
Pull out the detergent drawer.
1.
Pour in the detergent.
2.
→ "Detergent drawer",
Page 21
Fill in the care product if necessary.
3.
Slide in the detergent drawer.
4th
46
13.7 Start the program
Note: If you want to change the time
until the end of the program, first
set the Ready in time.
Press.
▶
a The drum turns and it
a load detection follows, which
can take up to 2 minutes and then
the water runs in.
a The display shows either pro
duration or the Ready in time is
displayed.
13.8 Adding laundry
Note: Note the information on
security
→
page 4 and avoid property damage
the → Page 11, to use your device
safely.
Press.
1.
The machine pauses and checks
whether you can add or remove
laundry. Note the program status.
Add or remove laundry.
2.
Close the door.
3.
Press.
4th
13.9 Abort the program
After the program has started, you can
cancel the program at any time.
Note: Note the information on
security
→
page 4 and avoid property damage
the → Page 11, to use your device
safely.
Press.
1.
Open the door.
2.
At high temperatures and high
water levels, the door remains
locked for safety reasons.
Advertisement
Table of Contents
