Setting The Program; Adjusting The Program Settings; Save Program Settings; Loading Laundry - Siemens WM14UP40 Instructions For Use And Assembly

Table of Contents

Advertisement

13.2 Setting the program

Turn the program selector to the
1.
desired program → Page 29
place.
If necessary, adjust the program
2.
settings → Page 45.
13.3 Adjusting the program
settings
Depending on the program and
program progress, you can adjust
the settings or activate and
deactivate them.
Note: Overview of all program
settings:
Pre-condition: A program is
set.
Adjust the program settings
sen.
The program settings are not
saved permanently for the
program.
Note: When you activate or
deactivate the intelligent dosing
system, the setting is saved.
Basic operation de

13.4 Save program settings

You can save your individual
program settings as favorites.
requirements
¡ A program is set.
¡ The program settings are
customized.
Press for approx. 3 seconds.
To call up the saved program,
press.
Note: To overwrite the saved
program, repeat the steps.

13.5 Loading laundry

Hints
¡ Note the information
on the subject of security → page 4
and avoid property damage
Page 11, to keep your device safe
need to be able to.
¡ To avoid creasing,
Note the maximum load of the
program → Page 29.
Pre-condition: Prepare and sort the
laundry.
→ "Laundry", page 41
Open the door.
1.
Make sure the drum is empty.
2.
45

Advertisement

Table of Contents
loading

Table of Contents