Table of Contents
Advertisement
de Troubleshooting
disturbance
Repeated arrival
sling.
Program duration change
changes during the
Washing process.
Water is not visible
in the drum
bar.
Drum jerks behind
Program start.
Vibrations and movement
the appliance during
spinning.
Drum turns,
Water does not run in.
68
Cause and troubleshooting
The unbalance control system compensates for the unbalance
by distributing the laundry several times.
No mistake - no action required.
▶
Note: When loading, place large and small items of
laundry together in the drum. Laundry items of
different sizes are better distributed during spinning.
The program sequence is electronically optimized. This can
lead to a change in the duration of the program.
No mistake - no action required.
▶
The unbalance control system compensates for the unbalance
by distributing the laundry several times.
No mistake - no action required.
▶
Note: When loading, place large and small items of
laundry together in the drum. Laundry items of
different sizes are better distributed during spinning.
The foam control system switches on a rinse cycle if the
foam builds up too much.
No mistake - no action required.
▶
Water is below the visible range.
No mistake - no action required.
▶
Do not fill an additional one during operation
▶
Water into the device.
The cause is an internal motor test.
No mistake - no action required.
▶
Device is not aligned correctly.
Align the device
▶
The feet of the device are not fixed.
Fix the device feet. Align the device
▶
Transport locks are not removed.
Remove the transport locks
▶
Load detection is active.
No mistake, no action necessary.
▶
Note: The load detection can take up to 2 minutes.
Advertisement
Table of Contents
