Siemens WM14UP40 Instructions For Use And Assembly page 66

Table of Contents

Advertisement

de Troubleshooting
disturbance
Program starts
not.
Door cannot be opened
nen.
66
Cause and troubleshooting
Door is not closed.
Close the door.
1.
To start the program, press
2.
Child lock is activated.
→ " Deactivating childproof lock ", page 47
/ is activated.
check if
→ "Keys", page 26
Laundry is jammed in the door.
Open the door again.
1.
Remove jammed laundry.
2.
Close the door.
3.
To start the program, press
4th
The detergent drawer is not pushed in all the way.
Slide the detergent drawer up to
Stop a.
The intelligent dosing system pump is blocked.
Turn off the device.
1.
Clean the pump unit.
2.
→ "Cleaning the detergent drawer", page 55
If the display reappears, call customer service.
3.
"Customer service", page 76
Note: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→ "Keys", page 26
is activated.
Continue the program by pressing Sling or
Pumping out select and press.
Temperature is too high.
Wait until the temperature has dropped.
→ " Abort program ", page 46
The water level is too high.
Start the program Pumping out.
Power failure.
Open the door with the emergency release.
"Emergency release", page 74
/
is activated.
.
.

Advertisement

Table of Contents
loading

Table of Contents