Siemens WM14UP40 Instructions For Use And Assembly page 71

Table of Contents

Advertisement

disturbance
Spin result is
not satisfied-
lend. The laundry is
too wet / too damp.
Detergent residue
de on the damp
laundry.
Cause and troubleshooting
The low spin speed is set.
Set a higher one for the next wash cycle
Spin speed.
Start the program Sling.
is activated.
Select programs suitable for the type of textile
the end.
→ "Programs", page 29
The drain pipe or water drainage hose is blocked.
Clean the drain pipe and water drain
running hose.
The drain pipe or water drainage hose is kinked or
pinched.
Make sure the drain pipe and the
The water drainage hose is not kinked or trapped.
The unbalance control system has stopped spinning
due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
Note: Place large and small items of laundry together
in the drum. Laundry items of different sizes are
better distributed during spinning.
Start the program Sling.
The unbalance control system compensates for unbalance
by reducing the spin speed.
Redistribute the laundry in the drum.
Note: Place large and small items of laundry together
in the drum. Laundry items of different sizes are
better distributed during spinning.
Start the program Sling.
Detergents can contain water-insoluble substances
that are deposited on the laundry.
Start the program Wash.
Unsuitable detergent filled into the dispenser of the
intelligent dispensing system.
Check whether the detergent used is suitable.
1.
"Detergents and care products", page 42
Troubleshooting de
71

Advertisement

Table of Contents
loading

Table of Contents