Table of Contents
Advertisement
de Troubleshooting
disturbance
Spin program
does not start.
Rustling, zi-
screeching sound.
Longer, whirring one
Noise before the start
of washing or
Fabric softener.
Short, whirring
noise after switching on
the device.
Loud noises during
rend of skidding.
Rattling noises,
Rattling in the lye
pump.
Slurping, rhythmic
nice sucking noise.
Wrinkling.
70
Cause and troubleshooting
The unbalance control system has stopped spinning
due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Note: Place large and small items of laundry together
in the drum. Laundry items of different sizes are
better distributed during spinning.
Start the program Sling.
▶
Water is rinsed into the detergent drawer under
pressure.
Not a fault - normal operating noise.
▶
Intelligent dosing system doses detergent or care
products.
Not a fault - normal operating noise.
▶
Intelligent dosing system carries out a function test.
Not a fault - normal operating noise.
▶
Device is not aligned correctly.
Align the device
▶
The feet of the device are not fixed.
Fix the device feet. Align the device
▶
Transport locks are not removed.
Remove the transport locks
▶
Foreign matter has got into the drain pump.
→ " Cleaning the drain pump ", page 57
▶
The detergent solution pump is active, the detergent solution is being
pumped out.
Not a fault - normal operating noise.
▶
Spin speed is too high.
For the next wash cycle, set a low
▶
adjust the spin speed.
Load is too high.
For the next wash cycle, reduce the load
▶
amount of manure.
The wrong program has been selected for the type of fabric.
Select programs suitable for the type of textile
▶
the end.
→ "Programs", page 29
Advertisement
Table of Contents
