Device With The Home Connect The Connect App; Activate Wi-Fi On The Device - Siemens WM14UP40 Instructions For Use And Assembly

Connect the mobile device to
the HomeConnect WiFi network
and enter the HomeConnect
WiFi password (key).
a Your mobile device connects
yourself with the device. The
connection process can take up to
60 seconds.
Open the Home Connect app on
5.
the mobile device and follow the
steps in the app.
Enter the network name (SSID) and
6th
password (key) of your home
network in the Home Connect app.
The steps in the
7th
Follow the Home Connect app
to connect the device.
a When the display con shows and
lights up continuously, the device
is connected to the home network.
If the display shows Home
8th.
Connect Error, the device is not
connected to the home network.
Check whether the device is
-
within range of the home
network.
Reconnect the device to the
-
WLAN home network (Wi-Fi) with
WPS function.
Connect the device to the Home
9.
Connect app → Page 51.
16.4 Connect the device to the
Home Connect app
requirements
¡ The device is connected to the WLAN home
network (Wi-Fi) connected.
¡ The Home Connect app is open
net and you have logged on.
Set the program to position 3.
1.
a The display shows APP.
Press.
2.
a The device connects to the
Home Connect app.
As soon as the device is displayed
3.
in the Home Connect app, follow
the last steps in the Home
Connect app.
a When the display con shows is
the device is connected to the
Home Connect app.
16.5 Activate Wi-Fi on the
device
Note: The energy consumption
increases compared to the values
given in the consumption value table
when Wi-Fi is activated.
Press for about 3 seconds.
1.
Set the program to position 4.
2.
a The display shows Con.
Press until the display
3.
on shows.
a Wi-Fi is enabled.
Hints
¡ The device does not switch itself
automatically off when Wi-Fi is
activated.
¡ The device does not switch itself
automatically off when Wi-Fi is
activated.
Home Connect
de
51