Siemens WM14UP40 Instructions For Use And Assembly page 61

Clean the strainer on the tap
Note: Note the information on
security
→
page 4 and avoid property damage
the → Page 11, to use your device
safely.
Pre-condition: The water inlet hose
is empty.
Remove the water inlet hose
1.
from the tap.
Clean the sieve with a small brush.
2.
Cleaning and care de
Connect the water inlet hose and
3.
check for leaks.
Clean the sieve on the device
Note: Note the information on
security
→
page 4 and avoid property damage
the → Page 11, to use your device
safely.
Pre-condition: The water inlet hose
is empty.
→ "Empty the water inlet hose",
Page 60
Remove the hose on the back of
1.
the device.
1
2
61