Adjusting The Color Shift (Vertical) Of An Image - Canon IX-R7000 Operation Manual

 Adjusting the Color Shift (Vertical) of an Image
You can adjust the color shift (vertical) of a color image.
1
Check that card is set in the printer.
2
Switch from normal mode to user
mode.
→See "Switching to User Mode" on page 23 for details on
how to switch to user mode.
3
Press the  key until [Image Setup] is
displayed, then press the SET key.
4
Press the  key until [Test Print(PatU)]
is displayed, then press the SET key.
• The pattern for color shift adjustment is printed.
5
Press the  key until [Color Shift Vtc]
is displayed, then press the SET key.
6
Change the settings by using the /
keys, then press the SET key.
• Set to the value printed beside the line that has the
least amount of color shift (clearly visible) from the
pattern printed out in Step 4.

Use a test print card since a used card cannot be reused.
Note
-6
Set the value of the line
most clearly visible.
-4
(The diagram shows a
value of "-3")
-2
-0
+2
Printer Settings
Normal Mode
MENU
Ready to Print Ready to Print
Printer Info. Printer Info.
Printer Info.
SET:>>
SET
Image Setup
Sharpness
SET:>>
Sharpness
Test Print(PatU)
SET:Start
Test Print(PatU)
SET
Color Shift Vtc
Color Shift Vtc
0
Color Shift Vtc
Color Shift Vtc
Color Shift Vtc
User Mode
SET:>> SET:>>
0
0
8
0
-8
36