Loading Magnetic/Ic Cards - Canon IX-R7000 Operation Manual

 Loading Magnetic/IC Cards
The factory default for magnetic cards/IC cards is to be loaded as below.
→See "Loading Cards into the Card Case" on page 7 for the procedure on loading cards into the card case.

In this manual, the direction of the card case and of cards is as below.
If using cards with ISO magnetic strips
• Load the ISO magnetic strips so that they are at the
right/rear of the card case.
If using cards with IC terminals
• Load the IC terminals so that they are at the left/rear of
the card case.

Do not print on the magnetic strip/IC terminal.
Note

The surface with the IC terminal is the printing side (front surface).

In user mode, [Set Face], you can set the orientation of loaded magnetic cards.
→See "Set the Orientation of Magnetic Cards/IC Cards to Load" on page 50 for information on how to load
magnetic cards.
Right
Rear
Front
Left
Card (Front
Surface)
Basic Card Printing Methods
Card Case Rear
Rear
Surface
Card Case Front
Card Case Rear
IC Terminal
Front
Surface
Card Case Front
10