Table of Contents
Advertisement
7
Change the settings by using the /
keys, then press the SET key.
• Confirm the confirmation pattern on the card issued by
procedure 5 and adjust so that the cyan line is aligned
with the yellow line.
• If you increase the setting value, the yellow line will
move towards the right of the cyan line.
(Setting values are by increments/decrements of
approximately 0.05 mm)
• Magenta is adjusted in the same way. (Cyan is the
base color so does not need to be adjusted)
• In the case of double-sided printing, adjust the rear
surface in the same way. Since color bleed is affected
by printing design the adjustment value differs for the
front and rear surface.
Cyan
Yellow
Magenta
Use a test print card since a used card cannot be reused.
Note
[Color Shift Hrz] in the [Image Setup] hierarchy tree is a function to automatically
correct color bleed (horizontal) of color images.
When it is set to [ON (AUTO)], correction is performed according to the design to
reduce color bleed.
Please use [ON (AUTO)] unless instructed otherwise by your place of purchase.
The factory default setting is [ON (AUTO)].
39
Menu
Y Shift Hrz-F
M Shift Hrz-F
C Shift Hrz-F
Y Shift Hrz-B
M Shift Hrz-B
C Shift Hrz-B
Adjust so that the the line can be clearly seen.
(In the picture yellow is moved to the left)
Adjustment
Moves the card front surface yellow printing.
Moves the card front surface magenta printing.
Moves the card front surface cyan printing.
Moves the card rear surface yellow printing.
Moves the card rear surface magenta printing.
Moves the card rear surface cyan printing.
Y Shift Hrz-F
30
Y Shift Hrz-F
0
Y Shift Hrz-F
-30
Advertisement
Table of Contents
